Clock Recovery Unit
CR6256
56Gbaud Clock Recovery Unit
Semight CR6256 is a compact, cost-effective and efficient desktop high-speed signal clock recovery unit, which supports either Non-Return-to-Zero (NRZ) or Pulse Amplitude Modulation 4-level (PAM4) signals clock extraction at 24.33-56.25Gbaud. It is widely used in 400G/800G high-speed communication optical transceiver and Interface test and measurement.
Features
Wide Range
Support NRZ / PAM4 signal clock extraction at 24.33~56.25Gbaud
Flexible Configuration
Single-Mode and Multi-Mode in one unit
Excellent Performance
Fast locking speed under auto/semi-auto mode
High Sensitivity
Very conducive to silicon photonic application with ultra-low input optical power
Wide Application
Complies with IEEE 802.3 Ethernet, PON, Fiber Channel, and OIF standards for 100G/200G/400G/800G and 25G/50G PON optical transceivers testing
Easy to Use
With either touch lcd screen or flexible remote-control solution, the CR6256 can work with sampling oscilloscopes easily and quickly
Multiple Frequency Output
Support 1/2, 1/4, 1/8, 1/16
More Application
CR6256 can be used with other sampling oscilloscopes in the industryFeatures and Benefits
High sensitivity
-12 dBm @ 26.5625Gbaud
Application
Optical transceiver with built-in DSP/CDR requires the use of a clock recovery unit. (4x56Gbaud or 8x56Gbaud PAM4)
Real-time monitoring of input power
LCD screen displays real-time input optical power, as well as the signal lock status.
|
Item |
Description |
|
Data Rate Input Range |
24.33024 ~ 28.9 Gbaud； 49.7664 ~ 56.25 Gbaud； |
|
Modulation |
NRZ/PAM4 |
|
Optical Interface |
FC/UPC |
|
Electrical Interface |
2.92 mm female，50 Ω |
|
Optical Input Power Range |
-12 ~ +5 dBm |
|
Optical Sensitivity |
-10 dBm @ 53.125 Gbaud PAM4/850 nm； -12 dBm @ 53.125 Gbaud PAM4/1310 nm； -12 dBm @ 26.5625 Gbaud PAM4； |
|
Wavelength Range |
800 ~ 1650 nm |
|
Factory Calibrated Wavelength[1] |
850/1310 ±10 nm |
|
Recovery Clock Divide Ratio |
1/2，1/4，1/8，1/16 |
|
Recovered Clock Amplitude |
300 mVpp |
|
Recovered Clock Random Jitter |
≤230 fs |
|
Clock Output Characteristic Impedance |
50 Ω |
|
Loop Bandwidth |
4 MHz (typical) |
[1] ±10 nm refers to the Calibration Light Source wavelength error
Similar recommendation
Optical communication network plays an important role in the rapid development of big data, cloud computing, 5G communication and other markets.
Semight offers various of instruments for optical Transceiver/Component testing, including wide bandwidth sampling oscilloscope, NRZ/PAM4 bit error ratio tester , burst error ratio tester, fast wavelength meter, optical spectrum analyzer, high precise source measure unit, 400G network analyzer ,optical power meter, optical attenuator, optical switch etc. Provide cost-effective complete solutions.
The high-precision source meter integrates the functions of voltage source, current source, voltmeter, ampere meter, and electronic load in one, which is widely used in high-precision IV test and measurement for various discrete components, photovoltaic, new energy, battery and other industries. Semight Instrument provides high-precision benchtop source meters and plug-in PXIe source meter modules of standard PXIe chassis, fully meeting the application of various test scenarios.
Details
Burn-in testing of laser is an important method to ensure the reliability of laser. Through the test of COC or bare die, the early failure of laser caused by the defects in the process of laser production can be screened out in advance. Semight Instrument provides a complete solution from bare die to COC, from high temperature(150℃ or higher) to low temperature (-40℃), with CoC automatic loading and unloading system, forming a complete test solution, Semight Instrument's laser chip burn-in/load/unload test system has been widely recognized by the market.
Details
The semiconductor front-end test is mainly used in the wafer processing to check whether the processing parameters of the wafer products meet the design requirements or there are defects affecting the yield after each step of the manufacturing process. The semiconductor back-end test equipment is mainly used after wafer processing to check whether the performance of the chip meets the requirements, which belongs to the electrical performance test. Semight Instrument provide integrated solutions such as wafer burn in and known good die tester, improve test efficiency and reduce test cost.
DetailsService hotline
Follow
Name
Email verfication code
Phone
Password
Confirm Password
e-mail address
Email verification code
New Password
Confirm Password
Datasheet
Ask for demo
